Free Call Australia : 1 800 834 991

Related Products

Omicron CP CR500 Compensating Reactor for CP TD1 

OMICRON CP CR500 Compensating Reactor for CP TD1 
  • Test the insulation quality of generators, motors, cables and other systems with large capacitances
  • High voltage source with maximum output voltage of 12 kV
  • Maximum output duration with optimal compensation by adjusting the frequency

Product Details

OMICRON CP CR500 Compensating Reactor for CP TD1

The compensating reactor allows the insulation quality of generators, motors, cables and other systems with large capacitances to be tested. The portable device is used in connection with the CPC 100 + CP TD1 for dissipation factor (tan delta) and power factor measurements.

For dissipation factor (tan d) / power factor testing and tip-up testing several CP CR500 units can be connected in parallel. Capacitances of up to 1µF (4 A) can be compensated with 12 kV test voltage and at mains frequency* (50 Hz / 60 Hz). The system can also be used as a high-voltage source to provide compensation of up to 2 µF, for example when performing partial discharge measurements. The frequency can also be varied (15 Hz … 400 Hz) to facilitate optimum compensation during long-time tests.

Key features

• Maximum test voltage of 12 kVeff at 4 A (1µF)
• Portable: compact dimensions and low weight
• Flexible: can be used as a high voltage source, as well as for dissipation factor (tan d) / power factor testing and tip-up testing
• Extendable: several units can be connected in parallel
• Long test times: Maximum output duration with optimal compensation by adjusting the frequency

Applications

• Test the insulation quality of generators, motors, cables and other systems with large capacitances
• High voltage source with maximum output voltage of 12 kV

MEGGER Capacitance and Dissipation Factor Test Sets 2.5 kV and 12 kV Interference suppression circuits. Automatic dissipation factor balancing & Direct readout. These test sets automat...
OMICRON CP TD1 Capacitance/Dissipation Factor Testing Device (Tan Delta) Combined with the CPC 100, the CP TD1 measures the capacitance and dissipation factor (power factor) with laborato...
MEGGER Resonating Inductor Expands the range of Capacitance and Dissipation Factor (Power Factor) Test Sets. Capable of tuning capacitances up to 1µF at 10 kV. Hand-crank tuning wheel. Co...
OMICRON CP RC Resonance Circuit for GIS Tester For HV testing OMICRON’s CPC 100 + CP RC are directly connected to the voltage transformer of the GIS, forming a resonance circuit. This rei...
WUHAN HUAYING HYGS Capacitance & Tan Delta Tester General introduction HYGS different frequency automatic dielectric loss tester is a high-precision instrument, which can be applied to...